The new GREX Sagaris GT kit can be purchased with Stages
1, 2, 3 and 4 together at price of 29.990 euros.
There are no separate chassis
or body sales.
The Grex Sagaris is based on all new parts so the car can be built to a high level of quality.
The customer doesn't need donor cars and parts. The full kit is composed by 14 stages plus some extra parts
such the engine, gearbox and exhaust system.
STAGE 1 – CHASSIS & SUSPENSIONS
- Space frame tubolar chassis with internal roll cage
- Engine bay will accept longitudinal engine packages, such V8 GM LS3, LS7 or LS9, or V6 or Straght six engines included Speedsix.
- Engine mount towers for GM LS-series engines as standard
- Chassis can be provided in RHD or LHD at no extra cost
- Suspension:
- Unequal length front upper arms
- Unequal length front lower arms
- 2 Front uprights
- Unequal length rear upper arms
- Unequal length rear lower arms
- 2 Rear uprights
- 4 Hubs
- 2 anti roll bars front and rear
- Toe links for adjustable rear suspension
STAGE 2 – BODY
- Central section with door openings, molded openings for fuel filler, locks, etc.
- Tail
section with molded openings for tail lights, body
locating pins, locks, etc.
- Nose section with molded openings
for headlights, turn indicators, radiator air inlet and splitters
- Full opening front Bonnet with 2 air vents diffusers
- Left and right side door assemblies,
including
inner and outer panels pre-bonded
- One piece rear diffusor
- 2 Electric side Mirrors
STAGE 3 – CHASSIS EXTRAS
- 2 Door steel beams
- Heated shield chassis
- Heated shield engine bay
STAGE 4 – BODY EXTRAS
- Front bonnet seals
- Rear glass seals
- Doors seals
- Front light covers
- Tail light covers
- Rear spoiler with brackets
- Doors latch mechanisms
- Front and rear bonnet latch mechanisms
STAGE 5 – STEERING
- Lightweight sports steering rack with integrated adjustable ends, 2.5 turns lock-to-lock. Lh or Rh.
- Mounting hardware & brackets for steering rack.
- Steering column complete
- Steering column stalks kit
- Steering Servo
- Steering wheel & boss
STAGE 6 – BRAKE COMPONENTS
- Pair front 4-piston calipers
- Pair rear 4-piston calipers
- Pair front vented 320mm discs
- Pair rear vented 304mm discs
- Front brake pads
- Rear brake pads
- Floor mounted
triple race-proven pedal assembly (pedals for clutch, brakes and
throttle)
- Dual brake master cylinders
- Clutch master cylinder
- Brake lines from pedals to brakes, plus braided
- Hand brake cables and lever
STAGE 7 – SUSPENSION KIT
- Biltein. 2 front shocks, 2 rear shocks
- Pair front springs
- Pair rear springs
- OPTION: Nitron sport suspension kit
STAGE 8 – FUEL SYSTEM
- Custom aluminum baffled fuel tank and fuel filler inlet
- Fuel pump
- Fuel pressure regulator
- Fuel tank heater
- Sender unit
- Aluminum lockable filler cap
- Fuel filler neck for filler cap
STAGE 9 – COOLING SYSTEM
- Custom aluminum radiator, rated for 600+ HP
- Radiator mount hardware
- Twin electric fans
- Expansion water tank
- Thermostat
STAGE 10 - LIGHTING
- Pair Hella DOT-approved projector main beam headlights
- Pair Hella DOT-approved deep beam headlights
- 6 rear Hella tail lights
- Pair front indicator and side lights
- Hella reverse and fog lights
- Licence plate light
- Third brake light
- Reflectors
STAGE 11 – ELECTRICAL
- Instrument
- Interior lamp
- Heating system
- Switches
- Wiring loom kit
- Wiper kit
- Horn
STAGE 12 – BODY GLASS
- E-approved windscreen, including factory black edging and transition tint
- E-approved side door glasses
-
E-approved rear tail glass
- Rear quarter glasses
STAGE 13 – WHEELS
- Front and rear aluminum wheels Spyder 18"
- Set of wheel nuts
- Front and rear tires
- OPTION: 19" alloy wheels and tires kit
STAGE 14 – INTERIOR
- Production dashboard in fiberglass
- Door cards
- Tunnel cover
- Seat belts
- Sagaris kick plates
EXTRAS
- GM LS3 V8 6200 engine 480-525 hp
- GM LS7 V8 7000 engine 505 hp
- GM LS9 V8 6200 Supercharged engine 640 hp
- Speedsix 4000 in line 6 engine 400-450 hp
- Tremec gearbox
- Differential and axles
- Complete exhaust system